10 effective ways to deal with textile pilling

10 effective ways to deal with textile pilling

Here to teach you the textile pilling 7 effective ways to deal with:


1. Choose the fiber that is not easy to pilling in the process of yarn and fabric production.


2. Pre-treatment and dyeing in the jet dyeing machine with Lubsoft lubricant to prevent rubbing.


3. Use crystalline sodium sulfate instead of common salt when dyeing cotton and polyester/cellulose blends with reactive dyes in jet dyeing machines.


4. Appropriate heat setting is used for polyester/cellulose fiber and polyester/wool blends to set the yarn and overfeed appropriately.


5. Brushing is performed at the same time as shearing to remove surface fibers as well as protruding fibers.


6. Both sides are burnished to remove surface fibers as well as protruding fibers.

ICI Pilling Testing Machine.jpg

7. For polyester and polyester/cellulose blends, partial alkali reduction of the polyester component can reduce the strength of polyester, so small balls can be easily removed.



评论

发表评论

此博客中的热门博文

Oxygen Index Tester - Test procedure for surface combustion method

图片
Oxygen Index Tester - Test procedure for surface combustion method Instrument structure: A complete test of the burning properties of insulating liquids -  Oxygen Index Tester  consists of a quartz glass combustion cylinder, test disc, test disc support, flow measurement and control device, ignition source, paramagnetic or chemical oxygen sensor, timer, smoke exhaust system. Test methods: (1) wick method in the specimen immersed in an inert material (such as glass wire, asbestos wire, etc.) made of wick , the Ignition only let the wick ignite . (2) surface combustion method, also known as the wickless method, ignition, the igniter against the entire surface of the liquid specimen, so that the entire surface are burning.
阅读全文

12 UV Accelerated Weathering Tester Maintenance Tips

图片
12 UV Accelerated Weathering Tester Maintenance Tips 1. If the UV Accelerated Weathering Tester is not working, keep it dry and disconnect the power supply. 2. After the test, drain the water in the tester, and dry the studio and the box. 3. After use, remember to put the plastic cover on to avoid dust intrusion. If there is dust, it should be removed in time. 4. The sensing device in the studio should not be subjected to strong impact; 5. The UV Accelerated Weathering Tester should be placed in a well-ventilated place (it is recommended to install a ventilation fan to maintain indoor ventilation), and should not be installed in a dusty place; 6. When the failure of the ultraviolet light aging test box cannot be ruled out by yourself, please find the personnel of the ring instrument, and do not disassemble and assemble without permission moer detail: https://www.qinsun-lab.com/News-and-events/1740.html 
阅读全文

How to properly maintain the UV aging test box?

图片
How to properly maintain the UV aging test box? Maintenance measures for UV aging test chamber : 1. If the UV aging tester is not working, keep it dry and disconnect the power supply. 2. After the test, drain the water in the testing machine, and dry the working room and the cabinet. 3. After use, remember to cover the plastic cover to avoid dust intrusion. If there is dust, it should be removed in time. 4. The sensing device in the working room should not be subjected to strong impact; 5. The UV aging test chamber is best placed in a well-ventilated place (it is recommended to install a ventilation fan to keep the room ventilated), and it should not be installed in a dusty place.
阅读全文